AddPac VoiceFinder AP200 Guía de usuario Pagina 251
- Pagina / 335
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1
AddPac Technology Co.,Ltd. -
251 -
5.7.4.16.1. Syntax
This command has no arguments or keywords.
5.7.4.16.2. Default Value
Enable
5.7.4.16.3. Command Mode
Dial-Peer Configuration Mode
5.7.4.16.4. Usage Guideline
Use the vad command to enable voice activity detection. With VAD, silence is
not transmitted over the network, only audible speech. If you enable VAD, the
sound quality is slightly degraded but the connection monopolizes much less
bandwidth.
If you use the no form of this command, VAD is disabled and voice data is
continuously transmitted to the IP backbone.
5.7.4.16.5. Examples
The following example enables VAD:
dial-peer voice 10 VoIP
vad
5.7.4.17. voice-class codec
To assign a previously configured codec selection preference list (codec voice
class) to a VoIP dial peer, enter the voice-class codec command in dial-peer
configuration mode. To remove the codec preference assignment from the
dial peer, use the no form of this command.
voice-class codec tag
no voice-class codec tag
- VoiceFinder 1
- [ Contents ] 2
- AddPac Technology Co., Ltd 9
- [ Symbols and Legends ] 11
- Warning 11
- Caution 11
- Information 11
- 1.2. Main Features 14
- Voice over IP Service 16
- IP Routing Protocols 17
- Internet Service 17
- Network Managements 18
- Security Functions 18
- Operation and Managements 18
- Other Scalability Features 19
- Front View of AP200 22
- Rear View of AP200 24
- 1.4.2. Network Interface 28
- Voice Processing Interfaces 29
- 2.1. Unpacking 31
- 3.1. Installation 37
- 3.1.2. Console Connection 38
- 4.1. Gateway Booting 46
- 4.2. Command Usage 49
- Command Description 52
- Commands Description 53
- Configuration Mode) 58
- 4.3. eZ-Setup(easy-setup) 59
- 4.5. Ethernet Configuration 61
- 4.5.2. PPPoE Configuration 65
- Operation 66
- 4.6. Routing Configuration 74
- [[Procedure] 79
- [NAT Glossaries] 86
- Order Operation 87
- 순서 작업 내용 Description 97
- Mandatory Commands 97
- Optional Commands 98
- DHCP Type = RELAY 101
- Next Server = 151.1.12.1 101
- [Procedure] 103
- 4.11. SNMP Configuration 108
- Sends a message 112
- 4.13.1. Logging Command 120
- 4.13.2. Show commands 121
- File Management 127
- 4.14.2. Password Recovery 129
- 4.15. Auto-Upgrade 137
- 5.1.1. Voice Over IP 139
- 5.1.2.1. Codecs 140
- 5.1.2.2. Mean Opinion Score 141
- 5.1.3. Dial Peer 143
- 5.1.4. Voice Ports 145
- Configuration 147
- IP Cloud 149
- Destination 149
- Voice Port 162
- Connection 162
- 5.3.4.3. Call barring 163
- Gateway 166
- 5.3.8.1. call-diversion 172
- 5.3.8.2. max-forward-hop 173
- 5.3.12.1. Busyout Monitor 177
- Configuration Voice Ports 178
- Step Command Description 179
- 5.5. FAX Application 180
- 5.7.2.1. dial-peer hunt 195
- 5.7.2.1.5. Example 197
- 5.7.2.2.1. Syntax 197
- 5.7.2.2.2. Default Value 197
- 5.7.2.2.3. Command Mode 197
- 5.7.2.2.4. Usage Guideline 197
- 5.7.2.2.5. Examples 198
- 5.7.2.3.1. Syntax 199
- 5.7.2.3.2. Default Value 199
- 5.7.2.3.3. Command Mode 199
- 5.7.2.3.4. Usage Guideline 199
- 5.7.2.4. dial-peer voice 200
- 5.7.2.5. gateway 201
- 5.7.2.6. num-exp 202
- 5.7.2.6.5. Examples 204
- 5.7.2.7. translation-rule 205
- 5.7.2.8. voice-port 206
- 5.7.2.8.2. Default Value 207
- 5.7.2.8.3. Command Mode 207
- 5.7.2.8.4. Usage Guideline 207
- 5.7.2.8.5. Examples 207
- 5.7.2.9.1. Syntax 208
- 5.7.2.9.2. Default Value 208
- 5.7.2.9.3. Command Mode 208
- 5.7.2.9.4. Usage Guideline 208
- 5.7.2.9.5. Examples 209
- 5.7.2.10.1. Syntax 209
- 5.7.2.10.2. Default Value 209
- 5.7.2.10.3. Command Mode 209
- 5.7.2.10.4. Usage Guideline 210
- 5.7.2.10.5. Examples 210
- 5.7.2.11.1. Syntax 211
- 5.7.2.11.2. Default Value 211
- 5.7.2.11.3. Command Mode 211
- 5.7.2.11.4. Usage Guideline 211
- 5.7.2.12. voice service 212
- 5.7.2.13. VoIP-interface 213
- 5.7.2.13.2. Default Value 214
- 5.7.2.13.3. Command Mode 214
- 5.7.2.13.4. Usage Guideline 214
- 5.7.2.13.5. Examples 214
- 5.7.3.1. comfort-noise 216
- 5.7.3.2. connection 217
- 5.7.3.2.4. Usage Guideline 218
- 5.7.3.2.5. Examples 218
- 5.7.3.3.1. Syntax 218
- 5.7.3.4. echo-cancel 219
- 5.7.3.5. high-dtmf-gain 220
- 5.7.3.6. input gain 221
- 5.7.3.6.1. Syntax 222
- 5.7.3.6.2. Default Value 222
- 5.7.3.6.3. Command Mode 222
- 5.7.3.6.4. Usage Guideline 222
- 5.7.3.7. low-dtmf-gain 223
- 5.7.3.8. output gain 224
- 5.7.3.9. polarity-inverse 225
- 5.7.3.10. ring number 226
- 5.7.3.10.3. Command Mode 227
- 5.7.3.10.4. Usage Guideline 227
- 5.7.3.10.5. Examples 227
- 5.7.3.11.1. Syntax 227
- 5.7.3.11.2. Default Value 228
- 5.7.3.11.3. Command Mode 228
- 5.7.3.11.4. Usage Guideline 228
- 5.7.3.11.5. Examples 228
- 5.7.3.12.1. Syntax 228
- 5.7.3.12.2. Default Value 229
- 5.7.3.12.3. Command Mode 229
- 5.7.3.12.4. Usage Guideline 229
- 5.7.3.12.5. Examples 229
- 5.7.4. Dial Peer Commands 230
- 5.7.4.1. answer-address 230
- 5.7.4.2. codec 231
- 5.7.4.2.2. Default Value 232
- 5.7.4.2.3. Command Mode 232
- 5.7.4.2.4. Usage Guideline 232
- 5.7.4.2.5. Examples 232
- 5.7.4.3.1. Syntax 233
- 5.7.4.3.2. Default Value 233
- 5.7.4.3.3. Command Mode 233
- 5.7.4.3.4. Usage Guideline 233
- 5.7.4.3.5. Examples 233
- 5.7.4.4.1. Syntax 234
- 5.7.4.4.2. Default Value 234
- 5.7.4.4.3. Command Mode 234
- 5.7.4.4.4. Usage Guideline 234
- 5.7.4.4.5. Examples 235
- 5.7.4.5. dtmf-relay 236
- 5.7.4.6. forward-digits 237
- 5.7.4.6.2. Default Value 238
- 5.7.4.6.3. Command Mode 238
- 5.7.4.6.4. Usage Guideline 238
- 5.7.4.6.5. Examples 238
- 5.7.4.7. huntstop 239
- 5.7.4.8. port 240
- 5.7.4.9. preference 241
- 5.7.4.10. prefix 242
- 5.7.4.11. register 244
- 5.7.4.11.1. Syntax 245
- 5.7.4.11.2. Default Value 245
- 5.7.4.11.3. Command Mode 245
- 5.7.4.11.4. Usage Guideline 245
- 5.7.4.12. session target 246
- 5.7.4.14. sid 248
- 5.7.4.14.4. Usage Guideline 249
- 5.7.4.14.5. Examples 249
- 5.7.4.15.1. Syntax 249
- 5.7.4.16. vad 250
- 5.7.4.16.1. Syntax 251
- 5.7.4.16.2. Default Value 251
- 5.7.4.16.3. Command Mode 251
- 5.7.4.16.4. Usage Guideline 251
- 5.7.4.16.5. Examples 251
- 5.7.4.17.1. Syntax 252
- 5.7.4.17.2. Default Value 252
- 5.7.4.17.3. Command Mode 252
- 5.7.4.17.4. Usage Guideline 252
- 5.7.4.17.5. Examples 252
- Command 253
- 5.7.5.1. announcement 253
- 5.7.5.2. codec preference 254
- 5.7.5.3. counter 255
- 5.7.5.4. discovery 256
- 5.7.5.5. fax protocol 257
- 5.7.5.6. fax rate 258
- 5.7.5.6.1. Syntax 259
- 5.7.5.6.2. Default Value 259
- 5.7.5.6.3. Command Mode 259
- 5.7.5.6.4. Usage Guideline 259
- 5.7.5.6.5. Examples 260
- 5.7.5.7.1. Syntax 260
- 5.7.5.7.2. Default value 260
- 5.7.5.7.3. Command Mode 260
- 5.7.5.7.4. Usage Guideline 260
- 5.7.5.8. force-starth245 261
- 5.7.5.9. h323 call start 262
- 5.7.5.9.3. Command Mode 263
- 5.7.5.9.4. Usage Guideline 263
- 5.7.5.9.5. Examples 263
- 5.7.5.10.1. Syntax 263
- 5.7.5.10.2. Default Value 263
- 5.7.5.10.3. Command Mode 264
- 5.7.5.10.4. Usage Guideline 264
- 5.7.5.10.5. Examples 264
- 5.7.5.11.1. Syntax 265
- 5.7.5.11.2. Default Value 265
- 5.7.5.11.3. Command Mode 265
- 5.7.5.11.4. Usage Guideline 265
- 5.7.5.11.5. Examples 266
- 5.7.5.12.1. Syntax 266
- 5.7.5.12.2. Default value 266
- 5.7.5.12.3. Command Mode 266
- 5.7.5.13. max-frame 267
- 5.7.5.14. gkip 268
- 5.7.5.14.1. Syntax 269
- 5.7.5.14.2. Default Value 269
- 5.7.5.14.3. Command Mode 269
- 5.7.5.14.4. Usage Guideline 269
- 5.7.5.15. h323-id 270
- 5.7.5.16. lightweight-irr 271
- 5.7.5.17. h323 call channel 272
- 5.7.5.17.2. Default Value 273
- 5.7.5.17.3. Command Mode 273
- 5.7.5.17.4. Usage Guideline 273
- 5.7.5.17.5. Examples 273
- 5.7.5.18.1. Syntax 274
- 5.7.5.18.2. Default Value 274
- 5.7.5.18.3. Command Mode 274
- 5.7.5.18.4. Usage Guideline 274
- 5.7.5.19. max-digits 275
- 5.7.5.20. password 276
- 5.7.5.21. public-ip 277
- 5.7.5.22. register 278
- 5.7.5.23. rule 279
- 5.7.5.23.3. Command Mode 280
- 5.7.5.23.4. Usage Guideline 280
- 5.7.5.23.5. Examples 281
- 5.7.5.24.1. Syntax 282
- 5.7.5.24.2. Default Value 282
- 5.7.5.24.3. Command Mode 282
- 5.7.5.24.4. Examples 282
- 5.7.5.25.1. Syntax 283
- 5.7.5.25.2. Default Value 283
- 5.7.5.25.3. Command Mode 283
- 5.7.5.25.4. Usage Guideline 283
- 5.7.5.25.5. Examples 283
- 5.7.5.26. signaling-port 284
- 5.7.5.27. timeout 284
- 5.7.5.27.2. Default Value 285
- 5.7.5.27.3. Command Mode 285
- 5.7.5.27.4. Usage Guideline 285
- 5.7.5.27.5. Examples 285
- 5.7.5.28.1. Syntax 285
- 5.7.5.29. ttl-margin 286
- 5.7.5.29.1. Syntax 287
- 5.7.5.29.2. Default value 287
- 5.7.5.29.3. Command Mode 287
- 5.7.5.29.4. Usage Guideline 287
- 5.7.5.29.5. Example 287
- 5.7.6.1. clear h323 call 289
- 5.7.6.2. clear voice port 290
- 5.7.6.3. show call active 290
- 5.7.6.3.1. Syntax 291
- 5.7.6.3.2. Default Value 291
- 5.7.6.3.3. Command Mode 291
- 5.7.6.3.4. Usage Guideline 291
- 5.7.6.3.5. Examples 291
- 5.7.6.4.1. Syntax 292
- 5.7.6.4.2. Default Value 292
- 5.7.6.4.3. Command Mode 292
- 5.7.6.4.4. Usage Guideline 292
- 5.7.6.4.5. Examples 292
- 5.7.6.7. show dial-peer 294
- 5.7.6.7.4. Usage Guideline 295
- 5.7.6.7.5. Examples 295
- 5.7.6.8.1. Syntax 295
- 5.7.6.8.2. Default Value 295
- 5.7.6.8.3. Command Mode 295
- 5.7.6.10. show gateway 297
- 5.7.6.11. show num-exp 298
- 5.7.6.13. show user-class 299
- 5.7.6.14. show voice port 300
- 5.7.6.16. debug VoIP call 302
- 5.7.6.17. debug VoIP 303
- IP Routing Service 305
- LAN Service 305
- Hardware Specification 307
© 2020, manymanuals.es. Todos los derechos reservados | 0.199 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales