AddPac AP2520 VoIP Guía de usuario Pagina 133
- Pagina / 368
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
PassFinder AP2520 VoIP Router/Gateway Operation Manual Version 1.10 / Mar. 2002
AddPac Technology Co., Ltd. -
133 -
z bridge forward-time<forward-interval>
1. An option of the global command This command decides the
forward delay interval.
2. The range is between 10 and 200 seconds. The default value is 30
seconds.
z bridge max-age <max-age-time>
1. An option of the global command. This command decides standby
time to wait until receiving BPDU from the root bridge.
2. The range is between 100 to 200 seconds. The default value is 15
seconds.
z no ip routing
1. An option of the global command. Use this command to operate the
Gateway as a pure bridge without operating routing functions.
2. For rerouting, the user must use “ip routing” command.
z show bridge
Shows bridge forwarding database entry.
z show bridge
Shows spanning-tree topology that the bridge is aware of.
z show running-config
Shows configuration contents that have been set including bridging.
- PassFinder 1
- [ Contents ] 2
- AddPac Technology Co., Ltd 10
- [ Symbols and Legends ] 12
- Warning 12
- Internet 14
- Infranet 14
- 1.2. Main Features 15
- Hardware Description 16
- Voice over IP Service 16
- IP Routing Protocols 17
- WAN Protocols 17
- Network Managements 17
- Security Functions 17
- Operation and Managements 18
- Other Scalability Features 18
- 1.3. External View 19
- No. Label Description 20
- 2.1. Unpacking 21
- 2.2.3.2. Ethernet Port 27
- 3.1. Installation 29
- Port Configuration Settings 32
- AC110~220V 32
- 4.1. Gateway Booting 39
- 4.2. Command Usage 42
- Command Description 45
- Commands Description 46
- Configuration Mode) 51
- 4.4. Ethernet Configuration 53
- 4.4.2. PPPoE Configuration 57
- Operation 58
- 4.5.2. PPP Configuration 70
- 4.6. Routing Configuration 88
- 4.6.2. RIP Configuration 92
- 4.6.3. OSPF Configuration 98
- Caution 100
- Information 106
- [[Procedure] 107
- [NAT Glossaries] 114
- Step Operation 115
- Configuration 123
- 순서 작업 내용 Description 125
- Mandatory Commands 125
- Optional Commands 126
- DHCP Type = RELAY 129
- Next Server = 151.1.12.1 129
- [Procedure] 131
- 4.11. SNMP Configuration 136
- Sends a message 140
- 4.13.1. Logging Command 148
- 4.13.2. Show commands 149
- File Management 155
- 4.14.2. Password Recovery 157
- 5.1.1. Voice Over IP 165
- 5.1.2.1. Codecs 166
- 5.1.2.2. Mean Opinion Score 167
- 5.1.3. Dial Peer 169
- 5.1.4. Voice Ports 171
- IP Cloud 175
- Destination 175
- Voice Port 188
- Connection 188
- 5.3.4.3. Call barring 189
- Gateway 192
- Step Command Description 198
- 60 PIN CONNECTOR 202
- RJ45_4PORT 202
- 5.7.2.1. dial-peer hunt 221
- 5.7.2.1.5. Example 223
- 5.7.2.2.1. Syntax 223
- 5.7.2.2.2. Default Value 223
- 5.7.2.2.3. Command Mode 223
- 5.7.2.2.4. Usage Guideline 223
- 5.7.2.2.5. Examples 224
- 5.7.2.3.1. Syntax 225
- 5.7.2.3.2. Default Value 225
- 5.7.2.3.3. Command Mode 225
- 5.7.2.3.4. Usage Guideline 225
- 5.7.2.4. dial-peer voice 226
- 5.7.2.5. gateway 227
- 5.7.2.6. num-exp 228
- 5.7.2.6.5. Examples 230
- 5.7.2.7. translation-rule 231
- 5.7.2.8. voice-port 232
- 5.7.2.8.2. Default Value 233
- 5.7.2.8.3. Command Mode 233
- 5.7.2.8.4. Usage Guideline 233
- 5.7.2.8.5. Examples 233
- 5.7.2.9.1. Syntax 234
- 5.7.2.9.2. Default Value 234
- 5.7.2.9.3. Command Mode 234
- 5.7.2.9.4. Usage Guideline 234
- 5.7.2.9.5. Examples 235
- 5.7.2.10.1. Syntax 235
- 5.7.2.10.2. Default Value 235
- 5.7.2.10.3. Command Mode 235
- 5.7.2.10.4. Usage Guideline 236
- 5.7.2.10.5. Examples 236
- 5.7.2.11.1. Syntax 237
- 5.7.2.11.2. Default Value 237
- 5.7.2.11.3. Command Mode 237
- 5.7.2.11.4. Usage Guideline 237
- 5.7.2.12. voice service 238
- 5.7.2.13. VoIP-interface 239
- 5.7.2.13.2. Default Value 240
- 5.7.2.13.3. Command Mode 240
- 5.7.2.13.4. Usage Guideline 240
- 5.7.2.13.5. Examples 240
- 5.7.3.1. comfort-noise 242
- 5.7.3.2. connection 243
- 5.7.3.2.4. Usage Guideline 244
- 5.7.3.2.5. Examples 244
- 5.7.3.3.1. Syntax 244
- 5.7.3.4. echo-cancel 245
- 5.7.3.5. input gain 246
- 5.7.3.5.1. Syntax 247
- 5.7.3.5.2. Default Value 247
- 5.7.3.5.3. Command Mode 247
- 5.7.3.5.4. Usage Guideline 247
- 5.7.3.5.5. Examples 248
- 5.7.3.6.2. Default 248
- 5.7.3.6.3. Command Mode 248
- 5.7.3.6.4. Usage Guideline 248
- 5.7.3.7. output gain 249
- 5.7.3.8. polarity-inverse 250
- 5.7.3.9. ring number 251
- 5.7.3.10.1. Syntax 253
- 5.7.3.10.2. Default Value 253
- 5.7.3.10.3. Command Mode 253
- 5.7.3.10.4. Usage Guideline 253
- 5.7.3.10.5. Examples 253
- 5.7.3.11.5. Examples 255
- 5.7.3.12.2. Default 255
- 5.7.3.15.4. Examples 259
- 5.7.3.16.2. Default 259
- 5.7.3.16.3. Command Modes 259
- 5.7.3.18. Usage Guideline 260
- 5.7.3.19.1. Syntax 261
- 5.7.3.19.2. Default Value 261
- 5.7.3.19.3. Command Mode 261
- 5.7.3.19.4. Usage Guideline 261
- 5.7.3.19.5. Examples 262
- 5.7.3.20.2. Default 263
- 5.7.3.20.3. Command Modes 263
- 5.7.3.20.5. Examples 263
- 5.7.4. Dial Peer Commands 264
- 5.7.4.1. answer-address 264
- 5.7.4.2. codec 265
- 5.7.4.2.2. Default Value 266
- 5.7.4.2.3. Command Mode 266
- 5.7.4.2.4. Usage Guideline 266
- 5.7.4.2.5. Examples 266
- 5.7.4.3.1. Syntax 267
- 5.7.4.3.2. Default Value 267
- 5.7.4.3.3. Command Mode 267
- 5.7.4.3.4. Usage Guideline 267
- 5.7.4.3.5. Examples 267
- 5.7.4.4.1. Syntax 268
- 5.7.4.4.2. Default Value 268
- 5.7.4.4.3. Command Mode 268
- 5.7.4.4.4. Usage Guideline 268
- 5.7.4.4.5. Examples 269
- 5.7.4.5. dtmf-relay 270
- 5.7.4.6. forward-digits 271
- 5.7.4.7. huntstop 273
- 5.7.4.8. port 274
- 5.7.4.9. preference 275
- 5.7.4.10. prefix 276
- 5.7.4.11. register 277
- 5.7.4.11.1. Syntax 278
- 5.7.4.11.2. Default Value 278
- 5.7.4.11.3. Command Mode 278
- 5.7.4.11.4. Usage Guideline 278
- 5.7.4.12. session target 279
- 5.7.4.14. sid 281
- 5.7.4.14.4. Usage Guideline 282
- 5.7.4.14.5. Examples 282
- 5.7.4.15.1. Syntax 282
- 5.7.4.16. vad 283
- 5.7.4.16.1. Syntax 284
- 5.7.4.16.2. Default Value 284
- 5.7.4.16.3. Command Mode 284
- 5.7.4.16.4. Usage Guideline 284
- 5.7.4.16.5. Examples 284
- 5.7.4.17.1. Syntax 285
- 5.7.4.17.2. Default Value 285
- 5.7.4.17.3. Command Mode 285
- 5.7.4.17.4. Usage Guideline 285
- 5.7.4.17.5. Examples 285
- Configuration Command 286
- 5.7.5.1. announcement 286
- 5.7.5.2. codec preference 287
- 5.7.5.3. counter 288
- 5.7.5.4. discovery 289
- 5.7.5.5. fax protocol 290
- 5.7.5.6. fax rate 291
- 5.7.5.6.1. Syntax 292
- 5.7.5.6.2. Default Value 292
- 5.7.5.6.3. Command Mode 292
- 5.7.5.6.4. Usage Guideline 292
- 5.7.5.7. h323 call start 293
- 5.7.5.8. gkip 294
- 5.7.5.9. h323-id 295
- 5.7.5.10. lightweight-irr 296
- 5.7.5.10.1. Syntax 297
- 5.7.5.10.2. Default Value 297
- 5.7.5.10.3. Command Mode 297
- 5.7.5.10.4. Usage Guideline 297
- 5.7.5.10.5. Examples 297
- 5.7.5.11. h323 call channel 298
- 5.7.5.11.5. Examples 299
- 5.7.5.12.1. Syntax 299
- 5.7.5.12.2. Default Value 299
- 5.7.5.13. max-digits 300
- 5.7.5.14. password 301
- 5.7.5.15. public-ip 302
- 5.7.5.16. register 303
- 5.7.5.17. rule 304
- 5.7.5.17.1. Syntax 305
- 5.7.5.17.2. Default Value 305
- 5.7.5.17.3. Command Mode 305
- 5.7.5.17.4. Usage Guideline 305
- 5.7.5.17.5. Examples 306
- 5.7.5.18.1. Syntax 307
- 5.7.5.18.2. Default Value 307
- 5.7.5.18.3. Command Mode 307
- 5.7.5.18.4. Examples 307
- 5.7.5.19.1. Syntax 308
- 5.7.5.19.2. Default Value 308
- 5.7.5.19.3. Command Mode 308
- 5.7.5.19.4. Usage Guideline 308
- 5.7.5.20. timeout 309
- 5.7.5.20.2. Default Value 310
- 5.7.5.20.3. Command Mode 310
- 5.7.5.20.4. Usage Guideline 310
- 5.7.5.20.5. Examples 310
- 5.7.6.1. clear h323 call 313
- 5.7.6.2. clear voice port 314
- 5.7.6.3. show call active 314
- 5.7.6.3.1. Syntax 315
- 5.7.6.3.2. Default Value 315
- 5.7.6.3.3. Command Mode 315
- 5.7.6.3.4. Usage Guideline 315
- 5.7.6.3.5. Examples 315
- 5.7.6.4.1. Syntax 316
- 5.7.6.4.2. Default Value 316
- 5.7.6.4.3. Command Mode 316
- 5.7.6.4.4. Usage Guideline 316
- 5.7.6.4.5. Examples 316
- 5.7.6.7. show dial-peer 318
- 5.7.6.7.4. Usage Guideline 319
- 5.7.6.7.5. Examples 319
- 5.7.6.8.1. Syntax 319
- 5.7.6.8.2. Default Value 319
- 5.7.6.8.3. Command Mode 319
- 5.7.6.10. show gateway 321
- 5.7.6.11. show num-exp 322
- 5.7.6.13. show user-class 323
- 5.7.6.14. show voice port 324
- 5.7.6.16. debug VoIP call 326
- 5.7.6.17. debug VoIP 327
- (Optional) 330
- (mandatory) 332
- IP Routing Service 336
- LAN Service 336
- WAN Service 336
- Interoperability Features 338
- Hardware Specification 339
© 2020, manymanuals.es. Todos los derechos reservados | 0.028 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales