AddPac VoiceFinder AP1100 Manual de usuario Pagina 103

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 130
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 102
APOS Quick Operation Guide Voice over IP
AddPac Technology Proprietary & Documentation 130 - 103
y Signaling type: Un-defined
y No. of channels: None
y Compand-type : A-law
APOS command script
!
hostname HO
!
interface ether0.0
ip address 192.168.1.1 255.255.255.0
!
! PRI controller configuration.
!
controller e1(t1) 0/0
signalling-type r2/dtmf
Clock slave
channel-group timeslots 1-31 0
!
voice-port 0/0 0
! E1(t1)
compand-type u-law
!
dial-peer voice 0 pots
destination-pattern 99T
port 0/0
!
dial-peer voice 1000 voip
destination-pattern 5683848
session target 193.158.1.2
dtmf-relay h245-alphanumeric
!
voip-interface ether0.0
!
APOS command script (Configuration Verification)
HO# show controller 0/0
Controller T1 slot(0)/port(0)
T1 Link is UP
No Alarm detected.
Applique type is Channelized T1.
Framing is SF, Line Code is AMI, Cable Length is Short 110.
Signalling type is R2-MFC.
7967 Line Code Violations, 2 Framing Bit Errors
1 Out Of Frame Errors, 2 Bit Errors
signalling type = r2
clock source = slave
channel group 0 = 1-24
1 2 3
allocated timeslots = YYYYYYYYYYYYYYYYYYYYYYYYNNNNNNN
outgoing barred channel group =
channel order = descending
b-channel negotiation = exclusive
Vista de pagina 102
1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 129 130

Comentarios a estos manuales

Sin comentarios