AddPac VoiceFinder AP1100 Manual de usuario descargar pdf (Pagina 37)

APOS Quick Operation Guide Voice over IP

AddPac Technology Proprietary & Documentation 130 - 37

interface ether1.0

no ip address

bridge

route 0.0.0.0 0.0.0.0 192.168.1.1

Related APOS commands & structure

At the above network diagram, the PC connected to LAN Switch

regards VoIP Gateway as a transmission path. So the IP address of

default router should be the Ethernet IP address of the Leased line

router. Also, the VoIP Gateway only accepts the traffic which has the

IP address of the VoIP gateway as the destination IP. The QoS is

applied to Up-Link interface, so the priority and bandwidth control of

all the traffic coming from the network under VoIP Gateway (LAN1)

to the Internet (LAN 0) including VoIP traffic is possible.

Configure the below parameters appropriate for the network

environment.

y IP address of the gateway: 192.168.1.2

y Net Mask: 255.255.255.0

y IP address of the default router: 192.168.1.1

y Bridge mode for LAN 0 & LAN 1 interface

y QoS configuration for LAN0 interface

y No IP routing required

To configure bridge mode application, follow this procedure.

Step Commands Description

# config

Enter configuration commands, one per

line. End with CNTL/Z

Enter APOS global configuration

mode.

(config)# no ip routing

Disable IP routing features.

(config)# no bridge spanning-tree

No BPDU Exchange feature is required.

(config-ether0.0)# interface ether0.0

(config-ether0.0)#

Enter the interface configuration

mode.

(config-ether0.0)# ip address 192.168.1.2

255.255.255.0

Assign the IP address to the interface.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 129 130

Sin comentarios

AddPac VoiceFinder AP1100 Manual de usuario Pagina 37